RO Antiscalant Chemical

PROPERTIES

        Threshold inhibition of carbonate, phosphate and sulphate scales

        Stabilization of iron manganese, aluminium and other metal ions

        Highly effective in silica polymerization

        Crystal modification of scale forming agents

        Very effective in broad spectrum of water used in membrane separation systems

        Reduces the frequency of cleaning

        Effectively work upto LSI 2.5

        Low dose rate leading cost effective operation

        Good performance with all types of  membrane

        Enhanced rates of recovery

        High quality and biodegradable ingredients used so it environmental friendly product

SPECIFICATIONS

APPLICATIONS

        For Effective control of scaling and fouling in RO/NF Membrane Systems

        Effective up to 150 mg/L of silica and 1.5 mg/L of fluoride in reject water

        Membrane systems used in pharma and food & beverage industry

        Effective Calcium Sulphate dispersant works whenever H2SO₄ is used in pretreatment

DOSAGE

C-TECH RO 504H typically a dose of 3 to 5 ppm feed water quantity, however exact dosage will vary depending on the characteristics feed water quality and operating conditions.

FEEDING

I It is recommended C-TECH RO 504H is normally dosed continuously prior to the final cartridge filter. It should be injected by chemical dosing pump from a dilution tank or directly from the drum to the feed water line. The amount of C-TECH RO 504H required to inhibit scale formation depends on the quality of feed water and operational parameters of the membrane system. The specific control ranges will be specified by the technical representative and can also assist you in determining the appropriate dose rate for your system.